How to Improve the Production Capacity of Superfine Mill?

When processing the fine powder with superfine mill, you should predict the output of finished products according to the materials and the production ability of materials. In production practice, there will be some factors which make the production of ultrafine below the expected yield effect, so we need to analyze and improve each influencing factor reasonably, in order to ensure the efficient and stable operation of the superfine mill. The mill will work smoothly and rapidly to meet the expected yield. As a professional manufacturer of superfine mill, Fote Machinery will analyze the factors which influence the production capacity of the superfine mill:

1. The properties of materials. The properties of materials have a direct effect on the yield of the superfine mill. When the hardness of the material increases, in order to grind the material sufficiently, the pressure of grinding roller on the grinding ring will also increase. At the same time, the energy consumption of the mill will increase, which leads to the reduction of its production capacity, and the yield of finished product is low. If the humidity of the material is too large, the milling process of superfine mill will be easy to produce fine powder adhesion, even adheres to the components of the equipment, which will reduce the production efficiency of the, superfine mill. During the transmission process of finished materials, it is also very likely to circulate air duct, analysis, or the blocking at the mouth of the discharging hole, thus the product cannot meet the requirements.

2. The fly ash processed by superfine mill can be used as roadbed filler; the filler of fly ash and 4~6% cement or 10~12% lime can be used for the trench and roadbed filler. The strength is very high, which has met the requirement of fly ash and it does not pollute the environment, especially no water pollution. When the stone is used as a coarse aggregate of the fly ash and lime mixture, it can can improve the early strength of pavement.

3. Because the production principle of superfine mill is that the grinding roller compact the grinding ring so as to realize the milling of the materials. Therefore, if the quality of the grinding roller and grinding ring are better, its grinding effect on the materials will be adequate; if the grinding roller and grinding ring are used in a short period of time with the emergence of serious wear and tear, it is unable to reach the fully ground of materials, which will lead to low production efficiency, and it cannot reach the production standard of finished products.